Previous Article

How to Build a Pole Barn for RV Storage

Next Article

How to Prevent Mildew in RV Storage

How to Build a Wooden RV Storage Shed

RVs are great transportation for a road trip. They can be cost effective because they allow one the opportunity to travel without having to worry about where to sleep at the end of the day. Storage can be tricky being that RVs take up more space than a conventional car, but in a few steps one can build a wooden RV storage shed.


  1. Prepare your post holes. Use a post hole digger to dig at least 36 inch deep holes to support the post. Dig holes 36 inches deep every four feet. The number of holes that you dig will depend soley on the length and width of your RV. A wooden RV storage shed should be bigger than the RV so that one has moving room when parking and maneuvering the RV.

  2. Place the poles. In each 36 inch deep hole place a 4x4 pole and secure the pole by filling the hole with cement up to ground level. Allow the concrete to dry for 24 hours before continuing to build the shed.

  3. Create the perimeter. Nail 4x4 posts across the top of the poles to create the perimeter. Connect all the poles; when finished you should have a four inch flat surface across the top of the poles. This perimeter will become the foundation for the roof. Nail 2x4 boards every 12 inches across the posts starting from the ground up until you reach the top of the post. Plywood will protect the outside of the walls. Nail 4x8 foot pieces of plywood to the outside of each of the 2x4 boards going across the completed walls. The 8 foot side of the plywood should be positioned vertically.

  4. Protect the shed. Using Tyvek paper, cover the outside of the plywood with a staple gun. Start at the bottom of the Tyvek paper and staple gun siding on the outside of the Tyvek paper starting from the bottom all the way to the top.

  5. Create the roof. Nail pre-made roof trusses to the top of the sheds 4x4 boards around the top. Cover the trusses with plywood to complete the roof. Staple felt paper to the plywood and starting from the bottom up attach the shingles. Your wooden RV storage shed is completed!