How to Build an Outdoor Patio Table
An outdoor patio table is essential for entertaining your guests outdoors. Building one yourself will give you the exact size you need instead of buying one at the store. You can also paint or varnish your table in any color you choose.
Things you will need:
- Two-by-four inch lumber
- Saw
- Chisel
- Drill
- Deck screws
- Five-by-one inch decking
- Paint or varnish
- Paintbrush
- Cut your lumber. Saw your lumber into four table legs at 26 inches. Next, saw two side aprons at 36 inches, another two at 34 inches and a support plank at 24 inches.
- Make cuts in your lumber. Make 4 inch cuts at each end of the aprons about 1 inch wide and 1 inch deep. Next, carve out the wood from the housing so that you have clean houses on each end of the apron.
- Place your table legs on a flat work space. Put them on the 2 inch side and position an end apron over two of the legs. Next, fit them into the housing, making sure that they are even with the legs. Using deck screws, secure the apron into the housing. Repeat this step for the rest of the legs.
- Put the support plank across the frame. Secure it with deck screws.
- Cut the decking. Make six lengths at 48 inches. Next, secure the decking in place with decking screws.
- Paint or varnish your table. You can either use paint or varnish or a combination of both. Using paint for the frame and varnish on the decking will give your table a distinguished look.