Previous Article

How to Buy Replacement Cushions for Wicker Furniture

Next Article

How To Buy Scrap Silver Jewelry

How to Buy Rough Lumber

Purchasing rough lumber can be very profitable if you are aware of the trade terms used.  All pieces of rough cut lumber are sold and cut by the board foot.  A board foot is an inch thick by 12 inches wide and 12 inches long.  Rough lumber is measured by its real size.  For example, if you measure a 2x4 purchased from a store with a ruler, you will notice the board is 1 ½ by 3 ½ inches.


 

Items you will need to by rough lumber include:



  • Pencil

  • Paper

  • Calculator

  • Tape measure



  1. Do some research and find a sawmill or wood dealer with a great reputation.  Call them ahead of time to see what they have to offer.  You can learn about their business practices as well through a phone conversation.

  2. Look at the stock they have available.  Notice if the lumber if air-dried or kiln dried.  Kiln-dry lumber cost more because of the process it goes through.  The kiln kills the eggs of insects that are in the lumber due to the high temperature.  Lumber that is air-dried is vulnerable to pest problems when it’s dried outdoors.  Be sure to ask the operator when the lumber was cut and how long it has been in the yard.

  3. Inquire about how the wood was stacked after cutting.  The wood should be sticker-stacked after being cut.  Individual boards should be stacked on 1 inch by 1-inch sticks.  The sticks are laid to create spaces between the boards.  The space creates air movement around the wet lumber and prevents mold from growing.

  4. Figure out the overall board footage by measuring out the end width and thickness from the stack.  Measure the length of the stack for the final count.

  5. Come up with the width board footage.  For example, if you have 6-inch wide boards, divide 6 inches by 12 inches to get .5 feet.  Next, multiply the 8-foot length by the .5 foot width.  This equals the board footage of 4 board feet and all of the 1 inch by 6 inch by 8-foot long boards.

  6. Calculate the 8-inch wide boards.  Divide 8 inches into 12 inches, which equals .67 feet.  Next, multiply .67 by 8 feet and you will get 5.36 board feet for each board.

  7. Multiply all the boards by the exact width.  For example, 20 boards times 4 board feet will equal 80 board feet.  Or 30 boards times 5.36 board feet equals 160.8 board feet.  If you combine the two figures, you will get 240.8 board feet.  If the operator were charging 50 cents a board foot, the price of the lumber would be $120.40.