How to Bypass a Vehicle's Thermostat
A faulty thermostat is the primary cause for several engine issues. A temporary fix for a faulty thermostat is to bypass the thermostat. Basically, you remove the thermostat to allow freely flow through the engine and keep the temperatures regulated. This bypass is only temporary, and a new thermostat installation is still required.
How to Bypass a Vehicle's Thermostat:
Step 1: Jack up your vehicle, using a floor jack.
Step 2: Position a bucket below the radiator and unplug the bottom plug on the radiator. Drain the radiator completely.
Step 3: Unbolt the thermostat housing using a socket wrench to loosen the bolts.
Step 4: Disconnect the thermostat housing from engine block. Pull the thermostat out of the housing.
Step 5: Reconnect the thermostat housing to the engine block and tighten the bolts. Screw in the bottom plug on the radiator. Refill the radiator with a mixture of antifreeze and water. Lower your car to the ground with the floor jack.