How to Change Norton Motorcycle Oil
Changing the oil of a Norton British motorcycle can be a challenge for a new owner. However, it is important to learn the task because owning a Norton is a rewarding experience for a vintage motorcycle enthusiast. Changing the oil is a standard maintenance task. It is handy to have a Norton manual in case you have any unanswered questions.
Supplies
- Socket wrench and sockets
- Oil catch pan
- Screwdrivers
- Strap wrench
- Towels
- Oil filter Sealing ring
- Engine oil
- Unlock the seat latches and remove the seat.
- Remove the oil cap and the dipstick from the oil tank.
- Open the bottom drain plug in the oil tank and remove the oil. Replace the plug and tighten with a wrench.
- Open the oil drain plug on the bottom of the engine and remove the oil from the crankcase and the oil sump.
- Wipe off the drain plug's magnetic tip before reinserting in the engine, then tighten it.
- Locate and replace the oil filter. It is positioned behind the kick starter on the right of the engine. Loosen the oil filter clamp using a screwdriver, then loosen the filter from the engine with a strap wrench. Unscrew the filter by hand and replace both.
- Place the new sealing ring on the engine and hand screw on a new oil filter. Use the strap wrench to tighten the filter and secure the retaining clamp with a screwdriver.
- Fill the oil tank to the correct levels on the oil tank's dipstick. The oils should be filled between the high and low marks on the dipstick indicator. Replace the oil cap on the tank and lock into place.
- Circulate the oil through the engine by starting the motor and idling for five to ten minutes. Recheck the oil on the dipstick to make sure the level hasn't changed.
- Shut the engine down. Allow the bike to sit for three minutes, then restart the engine. Allow the engine to idle for an additional three minutes. Repeat the process. Check of the dipstick again to ensure there is no change to the oil level.
- Remove the tank cap and refill if there is a significant change.
- Put the seat back on the frame and lock it into place.