Previous Article

How to Build a Generator From a Lawn Mower Engine

Next Article

How to Change the Oil in a Lawn Mower

How to Change the Blades on Lawn Mower

Key signs indicating that a lawn mower blade requires replacement are jagged grass edges, uncut patches and browning of grass a few days after cutting the lawn. This replacement is only necessary if sharpening the blade does not remedy the problem. 


  • Spark plug socket

  • One unused large plastic oil pan

  • 2 by 4

  • Air tank

  • New lawn mower blade

  • Socket wrench

  • Oil funnel



  1. Disable the lawn mower by removing the spark plug using a spark plug socket.

  2. Drain the gasoline out of the lawn mower gas tank. Lay the large unused plastic oil pan on the ground. 

  3. Tilt the lawn mower over the unused plastic oil pan and allow the gasoline to drain out completely. 

  4. Place the lawn mower on the ground sideways.

  5. Remove debris from the lawn mower using an air tank. 

  6. Position one 2 by 4 beneath the lawn mower blade. 

  7. Remove the lawn mower blade by loosening the bolt holding it into place using a socket wrench.

  8. Remove the 2 by 4 from beneath the lawn mower blade and slide the blade off the lawn mower. 

  9. Purchase a new lawn mower blade from the hardware store or an online vendor of your choice.

  10. Replace the lawn mower blade. Slide the new lawn mower blade onto the lawn mower.

  11. Position the 2 by 4 underneath the lawn mower blade. 

  12. Secure the lawn mower blade with the bolt using the socket wrench. 

  13. Set the lawn mower upright on the ground.

  14. Reinstall the spark plug and secure it with the spark plug socket.

  15. Place the oil funnel into the lawn mower gas tank. Pour the drained gasoline back into the lawn mower gas tank. 

  16. Start the lawn mower to ensure that it works properly.