Previous Article

How to Avoid Overheating a Tractor Engine

Next Article

How to Choose the Tractor Size for a Small Acreage

How to Change the Oil in a Tractor Trailer

It is necessary to change the oil on a tractor trailer regularly to maintain the engine and increase its longevity. Clean oil helps to protect an engine by keeping it lubricated, which prevents unnecessary strain on the engine. Changing the oil is a simple process that can easily be completed in no time.

Supply List



  • Oil

  • Oil filter

  • Standard wrench

  • Oil filter wrench

  • Oil pan



  1. Choose a level surface such as a garage to change the oil on the tractor trailer.

  2. Locate the oil pan on the underneath of the tractor trailer.

  3. Place an oil pan directly underneath of the oil pan to catch the oil as it drains.

  4. Locate the drainage plug on the oil pan and remove it with a wrench.

  5. Allow the oil to drain out of the drainage plug into the oil pan that has been placed underneath.

  6. Replace the drainage plug into the oil pan using a standard wrench to secure it in place. 

  7. Use a filter wrench to remove the old oil filter, and be sure to properly discard the old oil filter.

  8. Place the new oil filter in place and secure the filter by hand taking care to damage the new filter.

  9. Fill the oil compartment of the engine back up with the designated amount of oil for the tractor trailer you are working on.

  10. Look on the top of the engine for a cap labeled "Engine Oil."

  11. Remove the cap from the engine oil compartment and add the recommended amount of oil based on the manufacturers recommendations.

  12. Replace the cap once the oil has been added. The oil is now changed and the tractor trailer should be running better.