How to Change the Oil in a Troy-Bilt Walk Behind Lawn Mower
The oil in a lawn mower serves as both a coolant and a lubricant for the engine. Replacing the oil every 20 to 50 hours of operation, or at least along with the annual maintenance, will ensure that the oil can properly do its job. Regularly changing the oil in a Troy-Bilt walk behind mower will keep the engine working smoothly for years.
Supplies
- Paper Towels
- Old Container
- Crescent Wrench
- Funnel
- Lawn Mower Oil (Refer to your owner's manual for the recommended grade of oil for your mower).
Instructions
- Use paper towels to clean the dirt and grime away from the oil fill area.
- Locate the oil drain plug on your Troy-Bilt mower. On some models, the plug is located underneath the engine of the motor and on other models it is located at the base of the oil dipstick.
- Take the dipstick out of the oil reservoir.
- Place an old container underneath the drain plug to catch the oil.
- Place the crescent wrench around the drain plug, adjusting it for size if necessary.
- Turn the wrench counter clockwise until the plug is completely out. The oil will start to drain out as soon as the plug is removed.
- Let all of the oil drain out into the container.
- Place the plug back into position and use the crescent wrench to tighten it clockwise.
- Place a funnel into the oil reservoir, where you took the dipstick out.
- Slowly pour the oil into the funnel, while frequently checking the level of the oil with the dipstick to make sure that you do not overfill. If you overfill the oil reservoir, let the excess oil drain out through the drain plug.
- Position the dipstick back into the oil reservoir of your Troy-Bilt mower.