Previous Article

How to Activate an AGM Battery

Next Article

How to Check Lead Acid Batteries

How to Charge a Gel Battery

Gel cell batteries are smaller than car batteries and set up differently. They do not contain acid. They contain a gel-like substance instead. They are often called non-spillable batteries because of this. These types of batteries are often used in wheelchairs, all terrain vehicles and motorcycles.


  1. Purchase a gel cell battery charger from your local home improvement store. You can also purchase a charger that works on all types of batteries, including gel cell batteries.

  2. Connect the battery to the charger. Attach the red charger clamp to the positive battery post and the black charger clamp to the negative battery post. The positive post will be red or marked with a (+) symbol. The negative post will be black or marked with a (-) symbol.

  3. Turn on the battery charger and switch it to the "Fast Charging Mode." The charger should have a voltmeter displayed on the front. Charge the battery until the voltmeter reads 2.40 to 2.45 volts per battery cell. Charge the battery at this voltage until the current drops down to 0.01. The current will also be displayed on the charger.

  4. Change the battery charger to the "Float Charging Mode." Allow the battery to charge on this setting overnight or for several hours until is fully charged.

  5. Remove the battery from the charger, and turn off the charger. Place the battery in the wheelchair, ATV or motorcycle that uses it. Start the engine and allow it to run to make sure the battery is working properly.