Previous Article

How to Store Batteries Safely

Next Article

How to Discharge a LiPo Battery

How to Charge a LiPo Battery

Lithium polymer or "lipo" batteries are an alternative to the familiar lithium ion battery. The polymer design eliminates the metal casing of traditional lithium batteries, making them lightweight and ideal for cell phones, PDAs and other electronic devices. Charging a lipo battery is not difficult, but it is important that you following specific instructions. Improper charging can cause the batteries to overcharge and bring about a serious fire hazard.   



Things You Will Need



  • Lithium battery charger

  • Battery voltage tester



  1. Purchase a battery charger designed for lipo batteries.  A lipo charger will produce a small drop in voltage and turn itself off, when charging is complete. This ensures that the lipo battery isn’t overcharged.  A voltage readout and timer are added safety features on all good lipo chargers.

  2. Test the voltage on each individual cell of a battery pack using a voltage tester.  It is suggested that the voltage be checked every eight to ten charges.   A lipo battery pack with a cell voltage that deviates from the others by 0.1 volts or more may not be recognized as a full charge and will continue charging.  This may cause overcharging and trigger the battery pack to ignite or explode. 

  3. Put the lipo battery in the charger and turn it on.  Set the charger to 4.20 volts to fully charge the lipo battery.  Examine the readout to make sure that all cells of the battery pack are charging.  Setting the voltage lower will only give you an 80 percent charge, but will also extend the life of the battery.   

  4. Charge the lipo battery overnight if it was fully discharged.  Set the timer on the battery charger as an added precaution against overcharging.   If you are going to store the lipo battery, it is recommended that you only charge the battery 40 percent.  Storing a fully charged lipo battery can shorten battery life.  Lipo batteries should be stored out of direct sunlight and in a cool dry place. 

  5. Turn the charger off after the battery has been charged and removed from the charger.  Reinstall the battery into the electronic device it powers and turn the device on.