Previous Article

How to Change Transmission Oil

Next Article

Facts on Diabetes Type 3

How to Check Automatic Transmission Oil

Improper levels of transmission oil can wreak havoc on your vehicle. In order to check the levels of your transmission fluid or to check the quality of the fluid, you must access underneath your vehicle's hood. The process is relatively easy and well worth the few minutes it takes you to complete.

Items Needed:



  • Rag

  • Jack stand

  • Floor jack

  • Catch pan

  • Transmission oil



  1. Turn your car on. Either drive it around for a few minutes or just leave it running for a while.

  2. Find a location to park your vehicle where you can work on it. It should be on a flat surface.

  3. Put the parking brake on.

  4. Turn off your car and then pop open the hood.

  5. Look toward your engine compartment. You will notice a handle labeled "Transmission Oil."

  6. Remove the dipstick from its designated spot. Use a rag to wipe off the tranny fluid that is currently on the stick.

  7. Insert the stick into the tube completely.

  8. Remove the dipstick and check the oil reading. It should reach the "Full" line or very close to it. However, if it is close to the "Add" marker, you must add more tranny oil.

  9. Wipe off the fluid with a white rag. Examine the color of the liquid on the rag. If it looks red in appearance, your transmission fluid is normal. On the contrary, if the fluid looks brown or black in appearance, change the transmission fluid by draining the transmission fluid pan and pouring in fresh tranny fluid.

  10. Add any additional transmission fluid you need in order to fill your transmission fluid up to the "Full" line.