Previous Article

How to Clean Mold From a Ceiling

Next Article

How to Clean Mold From a Stucco Ceiling

How to Clean Mold From a Roof

Mold on a roof is not only unattractive, but it can also impact the shingles on the roof. Causing them to need replacing much sooner than they should. While you can hire someone to clean the mold off the room, this is a job that one can do themselves. You will need a ladder, push broom, chlorine bleach, clean water, gloves, and a pump sprayer.


  1. Water any plants under the roof thoroughly. This will help to protect them from the chlorine bleach.

  2. Place ladder on secure ground.

  3. Mix one-part bleach and three-parts water to apply to the roof. You will apply this with the pump sprayer.

  4. Using the pump sprayer, spray the entire roof. Let the bleach solution sit for approximately 10 to 15 minutes.

  5. Using a hose, rinse off the roof. Do not use a pressure washer, as it will damage shingles.

  6. If mold still remains, spray more bleach solution on the roof. After 10 minutes, use the bush broom to gently rub off mold. Be sure to not to rub hard, you do not want to remove the grainy pieces on the tops of the shingles.

  7. Rinse the roof with the hose. Always rinse off the bleach solution as leaving it on can cause damage to your roof.


 



  • To prevent the mold from coming back, you may want to cut back overhanging tree branches. This will allow more sunshine and air circulation to hit the roof.

  • Placing zinc strips under the shingles will also keep mold from growing.

  • To be sure that it is mold and not just dirt on your roof, apply a couple of drops of bleach to the stain. If it is dirt, the stain will stay; if it is mold, it will go away.