Previous Article

How to Clean Mold and Mildew From a Boat Cover

Next Article

How to Clean Mold and Mildew Off Furniture

How to Clean Mold and Mildew From Wood

Successfully cleaning mold and mildew from wood can happen provided the mold exists on the surface and has not yet affected the structural integrity of the wood. Mold will grow on new wood that contains a lot of moisture, or wood exposed to high humidity, near a body of water such as a lake or pool. Other contributing factors include warmth, reduced air circulation and food particles and grease that promote mildew and mold growth.

What you will need:



  • Heat

  • Scotch-Brite pads

  • Sponge

  • Humidifier

  • Fans

  • Trisodium phosphate

  • Chlorine bleach

  • Washing soda

  • Protective gloves 



  1. Locate the reason for and the location of the source of the mildew and mold. Remove that source of the mold before attempting to clean mold and mildew from wood. Using a dehumidifier goes a long way to prevent the build-up of humidity that aggravates the mold problem. Not addressing the source of the mold will allow it to return quickly.

  2. Ventilate the work area well and wear rubber gloves before beginning the removal of mold and mildew process. Scrub the surface of the wood briskly but not too harshly to damage the wood’s surface. Use hot soapy water and sponges and Scotch-Brite pads if needed.

  3. Rinse off the soap from the wood’s surface and wipe dry using a clean cloth. Make a solution of one part bleach and nine parts of water. Wipe the wood using a clean cloth dipped in this mixture. Do not use bleach on unfinished wood. In that situation use a mixture of one part of water and one part of rubbing alcohol. Allow the surface to dry for a minimum of 12 hours to ensure the mildew and mold dies. Also, remove the mold completely to prevent a reoccurrence because just killing it on the wood surface will not suffice. 

  4. Use a clean cloth and rinse the surface of the wood with water and allow to dry.