Previous Article

How to Clear a Drain Tube in a Refrigerator

Next Article

How to Clear a Drain With a Snake

How to Clear a Drain With a Shop Vac

Often times our drains become clogged overtime due to particles of food, hair, debris and small items that fall into the drainage pipe. These items can slowly build up and cause your pipes to drain slowly or clog completely. This is a problem that can be troublesome; however, with the use of a shop vac you will have your drain unclogged in no time.


  1. Empty any standing water that is in the sink or bathtub using a cup or bowl depending on the amount of standing water that is acquired.

  2. Remove the drain cover from the affected drain. This is usually attached with a screw in the center of the drain. Simply use the appropriate screwdriver depending on the type of screw and remove. Gently pull off the drain cover.

  3. Insert the shop vac hose into the drain that is clogged. If it leaves a gap at all you will want to fill this gap with a rag to ensure proper suction is formed. The more suction that you are able to achieve, the better chance you have of the shop vac sucking up whatever is stuck in your drain.

  4. Insert ear plugs prior to turning on the shop vac. The shop vac lets off a decibel level that is dangerous to the hearing if exposed for too long. Better safe than sorry; use your ear plugs for the duration of the treatment.

  5. Turn on the shop vac and allow time for suction to build up. Shove the rag down as much as you can between the drain walls and the shop vac hose.

  6. Move the shop vac hose in a circular motion while it is running. Continue to do this for approximately 10 minutes.

  7. Remove the shop vac from the drain. You may also remove your ear plugs at this time.

  8. Turn on the water and see if your drain is unclogged. If your drain is unclogged move to step 9; if not then you will need to repeat steps 1 through 7.

  9. Re-install the drain cover using the screw that you took out during step 2.