Previous Article

How to Cut Homeowners Insurance Costs

Next Article

How to Cut Like a Barber

How to Cut Lead Pipe

Lead pipes are used for plumbing in many houses. Sometimes it is necessary to cut them in order to remodel your home, make changes to your plumbing system or fix a leak. It is possible for almost anyone to follow a few quick an easy steps in order to cut lead pipes.

1.  Look at the pipe and decide where it needs to be cut. Using a permanent marker, make a circle around the part of the pipe that you will be cutting. It is important to wait for the ink to dry before touching or trying to cut it.


2.  Buy a hacksaw from a local hardware store. They are inexpensive and will help to easily cut the lead pipe. It is recommended that you use a hacksaw that will be large enough to easily cut the pipe.


3.  Slowly cut through the pipe with the hacksaw. Make sure this is done in a slow and controlled motion while trying to cut the pipe in an even line. Make sure that this is done in a motion that is pointed away from your body. Hold the pipe with one hand but keep your hand at least four inches from where you are cutting; be very careful not to cut your fingers. Press the saw firmly against the pipe when cutting.  


4.  Look at the pipe and try to find anywhere where the surface is not even. If it not even, use the saw to try to cut the part off where it is not even. Do this in a very slow and controlled motion. Use one hand to firmly hold that pipe and to keep it from moving. Next, put on gloves and use a knife to even the surface.