Previous Article

How to Clean Stainless Steel

Next Article

How to Paint Stainless Steel

How to Cut Stainless Steel Sheets

Stainless steel is a very attractive metal material that provides flexibility strength, and is corrosion resistant.  Stainless steel has become very popular in kitchens as well, and is used for refrigerators, stoves, and dishwashers. Depending on the thickness of stainless steel it can either be cut with sheers or a circular saw.

Materials Needed:



  • Safety goggles

  • Permanent marker

  • Snips or shears

  • Saw horse

  • Circular saw

  • Metal cutting blade

  • Sandpaper or metal file



  1. Use a permanent marker to mark your stainless steel sheet in the place where you want to cut it. Use a straight edge such as another piece of metal make a straight line.

  2. Lay thin stainless steel metal sheets down in a flat surface. Use a pair of snips or shears to cut thin stainless metal sheets that are between 25 and 15 gauge.

  3. Place the edge of the stainless steel inside the jaws of the snips or sheers. Carefully cut along the marked line. To prevent from getting a jagged edge make sure that you do not place all the way down on the sheers. To make a neat cut, open the snips after the first cut, realign the metal in the bottom of the sheers and make another cut. Do this until you cut the entire sheet.

  4. Use a circular saw to cut thicker stainless steel sheets. Set the stainless steel sheet on a sawhorse for easier cutting. Align the blade in the saw so that it will cut through the marked line. Turn on the saw and slowly slide it into the metal and allow for the saw to guide you.

  5. Use sandpaper or metal file to smooth the rough edges once the sheets are cut.