Previous Article

How to Build a Backyard Patio Roof

Next Article

How to Fix Covered Patio Roof Leaks

How to Design a Patio Roof

A patio always makes a tremendous addition to a home. It provides room for relaxing and entertainment. However, weather elements can alter how you enjoy yourself on the patio.  That’s why you should consider options for designing a patio roof. A roof is the best alternative to protecting your patio from the snow or rain.

Things you will need to design a patio roof:



  • Nails

  • Underlayment

  • Shingles

  • Concrete mix

  • 2-by-4 boards

  • 6-by-6 posts

  • Galvanized bolts and supports


 



  1. Obtain a building permit. This is because the roof will be joined to your home.

  2. Take measurements of the area and make a diagram. Create a detail of the slope and extension the new roof will have.

  3. Create a hole to put the footing in. The concrete footing will keep the ends of the roof’s support. Be sure it is three feet deep, and eight inches wide.

  4. Take some premixed concrete and pour in the hole. Make sure the anchor bolt is inserted about seven inches deep. Hold it into place until the concrete is set. There will be two of them, and one at each end.

  5. Put a galvanized column base, along with a one foot support at the top of the concrete footing. This will separate the support beam for the roof and concrete.

  6. Anchor the support beam, which should be treated wood, onto the galvanized column base. The support beam must be at least six feet and eight inches.

  7. Get rid of any laminate or brick veneer at the top, beneath the existing roof.

  8. Join a ledger with lag bolts that will penetrate the top plate or studs.

  9. Join galvanized metal joists or rafter hangers onto the ledger.

  10. Use some 2x4 boards to extend the roof. They will extend to the support beams that are at the end of the slab.

  11. Put in the beams with the galvanized support brackets. They should all be 10 to 12 inches apart.

  12. Cover up the support beams with some ¾ inch treated plywood.

  13. Cover with underlayment. Be sure you extend 18 inches from the new roof.

  14. Take either some shingles or roofing material to cover the roof.