Previous Article

How to Choose the Right Camera Film

Next Article

How to Know Camera Film Types

How to Develop Disposable Camera Film

Although more and more digital cameras are placed on the market it is essential to any photographer to learn how to develop disposable camera film. By learning these skills you could create and develop your own photographs captured on film. 


Items Needed:



  • Access to a dark room

  • Developer

  • Fixer

  • Photo paper

  • Film development canister

  • Disposable camera



  1. Read the labels on both your fixer and developer and prepare these chemicals according to the manufacturer's instructions. 

  2. Open your film development canister and remove the film reel. Place the cap, canister and reel in front of you so they are easy to find. Pick up your disposable camera and then turn off the lights. 

  3. Open the back of the disposable camera and remove the film. Locate the tab at the end of the film. Position this tab into the slot at the end of the reel. Begin loaded the film into the reel. Once you have the film wound around the reel place the reel back into the film development canister and place the cap back onto the canister. Turn the lights back on. 

  4. Read the directions on the developer to determine which amount its specific manufacturer subjects that you use for developing the film. Remove the cap from the canister. Pour this amount into the canister and wait the amount of time specified by the developer label and replace the cap on the canister. This takes just a few minutes. 

  5. Remove the cap from the film development canister. Pour out the developer. Repeat steps four and five to use the fixer to finish the development process. 

  6. Remove the film from the film development canister. Rinse the film with water until the chemical residue is completely removed. Cut your disposable film into strips. These strips are between five to six pictures wide.