How to Do MIG Tack Welding
Tack welding is the process used to join two different metals pieces at an angle. Tack welding them together prevents warping or crooked connections. The two pieces of metal need to be held together before the welding can take place. The MIG welding machine is a stand that holds the metal so metal can be connected at an angled seam.
Items Needed:
- MIG welder
- Two metal pieces
- Clamps
- T- square
- Protective gloves
- Welding Shield
- Measure then cut the two pieces of metal. Put on the protective gear before you begin the welding process. Make sure the work area is dry and there is no water nearby.
- Prepare the metal by cleaning it thoroughly. Use a metal wire brush to get rid of any dirt or rust. Place the metal pieces on a clamp so that you can apply a tack weld. The clamp holds the two piece in position.
- Make sure you have the right steel for the MIG welder. The gas produced provides a shield to allow the steel to accept the tacks without cooling too fast.
- Decide where you want to create the tacks. Use the MIG welder to hold the T joint, and square the joint. Make sure the metal is straight. You can hammer it lightly into the correct position if need be. At this point, the tack weld is still quite flexible.
- Line up the metals and weld the other side to create a T shape.
- Manipulate the pieces into any desired angle. The tacks are still in place to prevent the angle from moving as it cools off and shrink to the final shape.
- Weld the other side of the metal, making sure you go over the tack weld right across the entire line. The tack weld holds the metal in place but is not able to withstand any force. The final welding is quite strong.