How to Do Mobile Home Rubber Roof Coating
Mobile homes often have a rubber coating applied to their roofs to protect the metal panels from moisture and weather. Applying this substance is not difficult, but it can be dangerous, as you must climb on the roof to complete it.
Items Needed:
- Ladder
- Wire brush
- Paint scraper
- Broom
- Mop
- Bleach
- Water
- Water hose
- Patching cement
- Rubber roof coating
- Paint roller
- Position ladder in a safe spot in which you can reach the roof of the mobile home. Remember ladder safety. Improper use of ladders is one of the leading causes of accidents and deaths associated with home improvement projects. Be sure to use a safe ladder in a secure and safe location. If at all possible you should have a second person available for spotting and in case of an accident.
- Climb on the dry roof. Note that if the weather is wet or inclement it is best to postpone this task.
- Remove the old rubber coating. You can do this with a wire brush and a paint scraper.
- Clean the roof. Make sure large flakes of rubber coating and any other debris are gone by sweeping them away. Mop the roof with a bleach and water cleaning combination.
- Rinse the roof. Use a water hose with a high power spray to rinse the cleanser off the roof.
- Apply patching cement to holes, seams and flashing edges. Allow this cement to dry completely.
- Mix the rubber coating. This tends to settle, so be sure it is stirred thoroughly.
- Apply the rubber roof coating. Use a paint roller to spread the coating evenly.
- Allow the coating to dry. Apply a second coat if needed.