Previous Article

Top Things to Know About an Automobile Engine

Next Article

How to Get an Auto Tune-Up

How to Do an Auto Tune-Up

Keeping your car running properly with regular tune ups will increase the life of your vehicle and improve the performance. An auto tune up is generally comprised of changing the oil and filter. replacing the old air filter, changing out the spark plugs and checking the fluid levels.

Changing The Oil



  • When the car has cooled down find the base of the oil pan. Place a container or pan to catch the oil directly underneath it. Loosen the plug to let the oil drain out. Release the top oil fill plug to help the pan drain faster.

  • Locate the oil filter and unscrew it with a wrench or by hand. Replace the oil filter with a new one using the gasket set that comes with the new filter.

  • Replace the drain plug for the oil pan. According to the owners manual, pour in the advised amount of oil being careful not to over fill. Screw the fill plug back into place and start the engine. Check the oil dipstick to make sure the level is correct.


Air Filter



  • Find the air filter cover on top of the motor. Unscrew the butterfly nut and remove the air filter cap.

  • Take the old air filter out and replace it with a new one. The new filter should drop right into place.

  • Put the air filter cap back on and scew it tight.


Spark Plug Replacement



  • Using a spark plug wrench remove all of the old spark plugs. Keep the wires in order while removing the plugs.

  • Insert new spark plugs an attach the wires in the correct order. Hand tighten and then apply one turn with the spark plug wrench.

  • Start the engine to make sure the car is running as it should and you are done.