Previous Article

How to Drain Pipes for the Winter

Next Article

How to Draw a Home Plan

How to Drain Pipes Prior to Winter

Draining water from the pipes of a house that is not being lived in is an essential step to winterizing your home. If pipes are allowed to freeze with water inside of them, they can often burst. This will cause you a lot of unnecessary work that can be prevented by taking the time to drain your pipes before the cold weather sets in.


  1. Locate the main valve that controls the water that leads to your home's pipes. If you are unable to locate this valve your local water company should be more than happy to help you locate it.

  2. Turn off the main water valve. Be sure that you turn it off all the way. Use pliers to ensure that it is securely in the off position so that it does not accidentally get turned on by being bumped into accidentally.

  3. Turn on all sources of water in your home. Be sure to include sources of water such as the tub, kitchen sink, utility sink and laundry hook ups. It is very important that you do this to all water sources so that all water can be drained from your pipes.

  4. Allow all water sources to run until the water has completely run out of the pipes. You may want to leave the knobs in the on position for a few minutes to ensure any trapped or lingering water has the time to work its way out of the pipes.

  5. Allow all water to drain from your sinks and tub and ensure that there is no water coming out of your pipes at all.

  6. Flush your toilets numerous times so that all water is removed from your toilets' tank. You will probably need to flush each toilet a few times to remove all water from the bowel and the tank.

  7. Check all water sources to ensure you do not see any water escaping from them. If there is even a small drip coming out of one of your water sources you will need to check your main water valve to ensure that it is completely turned off. That little bit of water can build up over time and cause you problems.