Previous Article

How to Dry Out a Cord of Wood

Next Article

How to Dry Up a Runny Nose

How to Dry Out Electronics

Whether your electronic device has suffered flood damage or was in the path of a spilled drink, water damage can ruin electronics. However, if you react fast and have patience you may be able to recover the device back to its original condition. After as little as 48 hours, your device will be as good as new.

What You'll Need:



  • Paper towels

  • Large bowl

  • Uncooked white rice

  • Lint-free cloths

  • Large room fan



Instructions:



  1. Remove the electronic items from the water immediately and place them in a cool and dry place. If there are any power cords ensure they have been removed from the water source as well. Use a paper towel to assist you with drying process.

  2. Remove the battery included within your electronic device, if necessary. The best way to dry out a battery is to allow it to thoroughly air dry.

  3. Fill a bowl with rice. Make sure the rice is white and uncooked.

  4. Place the electronic device in the bowl of rice and allow it to set for at least 24 hours. The rice absorbs the moisture out of the device. Hook up a large room fan and place the electronic device directly in front of if the item is too large to fit in a bowl of rice.

  5. Wait at least 48 hours before attempting to power the device on (after you feel confident the device is thoroughly dry).



  • It may also be helpful to open the electronic device up as well. However, this should only be done if you are confident that you can correctly re-assemble it.