Previous Article

Types of Couches

Next Article

How to Find the Best Online Furniture Shops

How to Extend a Dining Table

A dining room table should be a sufficient length to hold all members of the family for a meal. However, there are times when the normal length of a table will not be sufficient for what you are needing. When this occurs, you will need to use a leaf to help.


 


  1. Look to see if your dining room table is able to be extended. For proper table extension, your table will come with one or two leaves. It should also have hardware at the bottom of the table which allows the table to be locked in place. If you do not have these two items, your table is not able to be extended. 

  2. Unlock the hardware at the bottom of the table. There should be a piece of hardware at each end of the table along the seam. Although each table’s hardware is different, most likely, you will need to turn each hardware a certain direction to unlock the mechanisms.

  3. Pull the table apart. This is best done by two people. Have each person pull the table towards themselves at the same time. This should cause the table to open up and leave a large gap in between each side.

  4. Place each leaf in the middle of the table. Make sure any notches line up so that the table will fit together properly once it is pushed back together. 

  5. Push the table back together. Each person should push the table away from themselves at the same time. The table is now extended and is safe to use.