Previous Article

How to Dispose of Roofing Materials

Next Article

How to Use Rubber Roofing Materials for Flashing

How to Figure Roofing Materials

If you plan on fixing your roof, then you need to figure out the roofing materials. Roofing materials are sold by the square. If they are rectangle on each side of the ridgeline, then they simple to calculate. However, if they are triangles then you would have to use a little bit more math.

Things You'll Need:



  • Ladder

  • Diagrams

  • Measuring Tape



  1. Go on the roof by means of a strong ladder. If you do not have comprehensive diagrams of your home, then you can not size up the roof exterior. You must have two people and a 25-foot measuring tape, bound by the dimension of your home.


  2. Determine the dimension of each specific roof section. For instance, evaluate the perimeter of the eaves to the ridgeline and from the left perimeter of the roof to the right perimeter of the roof. Add the sizes up to the following complete foot. Roof sections that are not a square or rectangle are frequently triangles. Determine the two sides attached with the right slant.




  3. Determine the square foot of each section. Remember that for squares, multiply the length times the width. For triangles, multiply the length times the width and divide by two. Total the square footage of all the roof sections for the entire square footage of roofing necessary. You need to divide the amount of square feet by 100 for the number of squares required. Insert a excess factor of 1 to 5 percent supported on the difficulty of the roof, consistent with the website Fine Home Building. A nonprofessional team might want an additional square for excess.