Previous Article

How To Fill a Swimming Pool

Next Article

How to Fill Out a Formal Wedding Reply

How to Fill Cracks and Do Plumbing

Cracks are common in many sinks, toilets and pipes. When these things become cracked, it can cause air to come into your house or water to leak from pipes. Filling cracks and plumbing your drains are very important parts of home maintenance. Repairing crack and plumbing problems helps protect your home from clogs, leaks and water damage.

Fill Cracks


Step 1: Purchase some expanding foam from your local hardware store. Expanding foam comes in a can. The foam is sprayed into crack, and expands to fill them in. If you cannot find the expanding foam on your own, ask a store associate to help you. Expanding foam normally costs between $3 and $5 a can.


Step 2: Locate the cracks that need to be filled. Large cracks will be easy to spot, while smaller ones will be harder. Be sure to look behind pipes, toilets and sinks.


Step 3: Open the expanding foam and place the straw in the nozzle. Insert the straw into a cracked area and push the button or trigger. The foam comes out of the straw and fills in the crack. Because the foam expands, you do not have to use too much. Plan to fill all of the cracks you have found. The foam dries and hardens in the nozzle of the can within a few hours. When you are finished filling the cracks, throw the can in the trash.


 


Plumbing


Step 1: Purchase some drain cleaner from your local hardware store. Drain cleaner is full of powerful chemicals that can help dissolve and remove clogs in your drains. Allow the drain cleaner time to work and then run some water to see if your drains are unclogged.


Step 2: Use a plunger to help remove the clogs if the drain cleaner did not completely unclog your drains. Place the plunger on top of the drain. Push the handle of the plunger straight down as if you are pushing through the plunger and into the drain. Do this a few times and run the water to see if the clog is gone. Repeat this process until the clog is completely removed.


Step 3: Purchase or rent a drain snake from your local hardware store. Turn the snake clockwise as you insert it into your drain. Twist the snake into the drain until you feel it hit the clog.


Step 4: Turn the snake over and over again gently pulling up from time to time. This helps break up the clog. Push the snake down and pull it up over and over again until you feel the clog break free of the drain.


Step 5: Pull the snake and the clog straight out of the sink. Pull the clog from the snake and dispose of it in a trash can. Use a towel to clean the snake. If you have purchased the snake, you can store it for future use. If you rented the snake from the hardware store, return it in a timely manner.