How to Fill a Compressed Natural Gas Tank
The number of people driving vehicles powered by natural gas is increasing at a steady rate. You must locate a service station that sells compressed natural gas, because all service stations do not sell it. It is very important that you learn how to properly fill your vehicle with natural gas.
- Look on the side of the pump to find the pressure level gauge. This should be done so you can determine how fast you will be able to fill your tank.
- Remove the nozzle from the gas pump. Depending on the type of pump you are using there may be some kind of latch securing the nozzle in place that you will need to remove, but most nozzles just lift right out of the cradle.
- Carefully attach the fueling nozzle of the pump to the vehicle. You will hear a clicking sound when the nozzle is securely connected to the vehicle.
- Move the level on the fueling pump to the "on" position by lifting up on the level. It will remain in the upright position until you lower it manually.
- Turn on the filler valve, which is located on the fuel nozzle. The valve should be turned slowly in the counter clockwise direction. The natural gas will start to flow in tank as soon as the valve is turned. Do not be alarmed if you hear a whistling sound when the gas starts to flow in the tank because this is not uncommon.
- Flip the dispensing level to the "off" position when your tank is full.
- Place the filler valve on "vent".
- Remove the nozzle from the vehicle and return it to the cradle of the pump.