Previous Article

How to Cover Your Unfinished Cabinets

Next Article

How to Paint Unfinished Cabinets

How to Finish Unfinished Cabinets

Purchasing unfinished furniture is a great way to save money when you are on a budget. You can get good quality furniture but you will have to apply a finish to the furniture. The process is not hard to accomplish and will only require one weekend to complete.

How to Finish Unfinished Cabinets


Materials Needed



  • Screwdriver

  • 220 grit sandpaper

  • 80 grit sandpaper

  • Cloth

  • Stain

  • Paint stick

  • Paintbrushes

  • Polyurethane



  1. Disassemble the furniture. Use a screwdriver to remove any hinges, doors, pulls and hardware. Place those small pieces in a plastic bag so you can find them later.

  2. Sand over the entire piece of unfinished furniture with 220-grit sandpaper. Apply the sandpaper to an orbital sander to cover large areas. Sand the smaller areas by hand with the sandpaper, especially drawer fronts.

  3. Wet a cloth and wring it out until it is damp. Use the cloth to remove all of the sanding dust from the furniture piece. Allow the furniture to completely dry.

  4. Remove the lid from the stain and blend it with a paint stick. Use the appropriate paintbrush to apply the stain over the furniture. Allow the furniture to dry for 24 hours and apply a second coat. Allow the second coat to dry for 24 hours.

  5. Use a paintbrush with natural bristles to apply polyurethane over the unfinished furniture. Allow the furniture to dry for eight hours. Use 80 grit sandpaper to light sand over the furniture. You will only need to use light pressure.

  6.  Apply two additional coats of polyurethane but allow each coat to dry for 24 hours before applying the next. Allow the furniture to dry for five days. Reattach the hardware, doors, hinges and pulls.