How to Fit a KIA Rio Tow Bar
A tow bar, also known as a towing hitch, is used by vehicle owners to haul items such as utility trailers. These are very handy for car owners, as they do not have the room for larger items. A Kia Rio is compatible with a tow bar, and it is not difficult to install.
Items Needed:
- Towing bar kit for Kia Rio (ensure it is the proper model for your car)
- Wrench
- Locate a level spot to park your Kia Rio. It is extremely important to the installation process for the ground to be completely level.
- Turn the ignition off once you have parked the car.
- Remove the exhaust hanger. The exhaust hanger is found at the rear of the car, and can easily be taken off by hand. This step will lower the exhaust.
- Locate and remove the clips on the back bumper.
- Put the new crossbar from the tow bar kit over the exhaust.
- Use your fingers to attach the bolts supplied in the kit. This will loosely secure the crossbar into place.
- Use a wrench to fully tighten the bolts.
- Reconnect the bumper clips and the exhaust hanger.
- Attach the swan neck part from the tow bar kit to the middle of the crossbar.
- Put the electrical plates provided in the tow bar kit on the left metal piece of the crossbar.
- Tighten all the bolts with the wrench.
- Connect the safety chain from the tow bar kit to the right piece of the crossbar, and tighten bolts with your wrench.