How to Fix Leaking Arched Windows
Having leaking arched windows is a common problem unfortunately. This is because due to their shape flashing isn’t usually installed between the window and the wall frame. Fortunately, this is an easy problem to fix. It only takes a little caulk and a ladder.
Things That You Will Need
- A box knife
- A putty knife
- A caulk gun
- Silicone caulk
- Some damp rags
- Use a ladder to climb up to your arched window. Make sure that you can work on your window without having to move it much.
- Use a box knife to cut into your old window.
- Slide your knife around the entire window frame to cut the caulk’s seal off the frame.
- Pry the old caulk out of between the arched window frame and the house.
- Cut the tip off your tube of silicone caulk.
- Stick the tube’s tip in the hole.
- Squeeze the trigger.
- Use the metal rod that is attached to your caulk gun to poke a hole inside the tip of the tube of caulk.
- Release the back of your caulk gun and pull the push rod as far out as you can in order to load your tube into the caulk gun.
- Squeeze the caulk gun’s trigger several times until the end of the push rod is against the bottom of the tube.
- Recaulk your arched window.
- Start at any point of the window’s frame then stick the caulk gun’s tip into the space between the frames.
- Hold your caulk gun at a 45-degree angle and steadily squeeze the trigger while moving it along the window frame. Whenever you restart, make sure to overlap the caulk.
- Drag your fingertip at a 45-degree angle along the top of the caulk to shape the caulk and smooth it into place.
- Use damp rag to clean up any excess before it dries.