Previous Article

How to Fix Kitchen Counters

Next Article

How to Fix Microsoft Word Crashes

How to Fix Leaks in Plumbing Pipes

Leaks in the plumbing pipes have the potential to become more expensive than other types of plumbing problems. This type of leak should not be ignored and repaired immediately. There are things that almost any homeowner can do to repair leaks in the plumbing pipes. The leaks can easily be repaired and no special tools are required.

1. Turn off the water supply so you can work on the leak. You can find the valves to the water supply under the plumbing area.
 
2. Use a dry cloth to dry the pipes. You need a clean and dry area so you can repair the pipes easily.
 
3. Wrap electrical tape around the plumbing pipes. Make sure the tape is wound tightly with several layers. The tape should be wrapped way beyond the leaks. The electrical tape will be sticky and strong enough to seal off the leaks.
 
4. Epoxy can also be used for the leaks. The epoxy can be purchased at your local home improvement or hardware store. Make sure you dry the area with a dry cloth before applying the Epoxy.
 
5. Sand the area with sandpaper. Use 400-grit sandpaper.
 
6. Mix the Epoxy according to the directions. Apply it to the leak and wrap the area with fiberglass tape.
 
7. If the leak is coming from the fittings, you can also use Epoxy. Remove the fitting.
 
8. Clean the fitting with a degreaser. Apply the Epoxy to the fitting thread and screw it back on the plumbing pipes.