How to Fix One Panel of a Vinyl Fence
If you are looking for a low-maintenance fence, vinyl is the best choice. However, although it does not rust, it can become damaged from the elements. A vinyl fence can require repair, especially if you live in a climate which experiences seasonal changes. Climate changes can make vinyl fencing brittle, causing it crack or chip.
Fortunately, vinyl fencing is fairly easily repaired. It is made up of individual pieces locked together on a rail. Damaged pieces can be removed and replaced with new ones. Here is how.
Supplies
Replacement vinyl fence picket
Screwdriver
- Use your screwdriver to remove the fence bracket holding the damaged fence panel rail to the post. Remove all the screws from the bracket to free the panel rails. Once the bracket is removed, the fence rail should be separated from the post.
- Pull the fence panel away from the post.
- Call the supplier where you purchased your fence.
- Suppliers generally carry additional pieces of a fence in stock, for repair emergencies.
- However, if you are not sure of where the fence was purchased, take the damaged piece of the fence with you to a local hardware or home improvement store that sells vinyl fencing.
- Try to match your piece to any available pieces they have in stock. If they do not carry additional pieces, inquire if they can order then from their supplier.
- Remove the damaged piece from your fence rail.
- Replace it with the new one.
- Reattach the secured brackets back into the fence post, using the screwdriver. Slide the fence rail back into the bracket.
- Tighten all screws to secure the fence back into place.