Previous Article

How to Make Cheap Window Valances

Next Article

How to Install a Main Circuit Breaker Panel in a Wall

How to Fix a Circuit Breaker Panel

A structure's circuit breaker panel serves as a way to start or stop the flow of an electrical current to different parts of the building. While a qualified professional should only handle some electrical problems, fixing a circuit breaker panel is usually a simple repair.


 

Items needed:



  • Screwdriver

  • Pliers

  • Work gloves


Instructions:



  1. Locate your home's main power switch. This switch is usually positioned next to the circuit breaker or within the circuit breaker's panel. The main power switch may be near the electric meter in older structures. Turn the main power switch to the off position.

  2. Open the door to the unit, and use a screwdriver to remove the circuit breaker's exterior covering. Determine which circuit breaker panel needs to be repaired.

  3. Remove the faulty circuit breaker by pulling it out from its housing. In some cases, you may be able to remove the breaker by simply pulling on it with your fingers. For hard to remove breakers, grasp the handle of the breaker with a pair of pliers and pull.

  4. Replace the item with an identical breaker panel. Check the manufacturer's specifications to ensure that the new breaker you purchase has the same amp rating as the old circuit breaker.

  5. Use pliers to place the new circuit breaker into the old slot. You may also use your hands for this task, although you may want to wear work gloves to ensure a firm grip.

  6. Screw the hardware for the exterior covering back into place using a screwdriver. Turn the main power switch to the on position, and close the unit's door.