How to Fix a Computer CPU
Fixing a computer CPU will take time and patience. A professional may not be needed in order to fix a computer CPU. Information about the manufacturer will need to be obtained, as well as the model number in case the CPU needs replacement. Once the CPU is working properly, the computer should function as if brand new.
- Inspect the fan in order to make sure that it's working properly. A fan can be attached to any area inside of the case. It can also be attached to power connections on the motherboard.
- Determine if the fan is the issue. If not open the case by first disconnecting the wires. The CPU is located in the center of the motherboard, which is normally under a large heat sink or fan unit
- Investing in a new CPU may be required. If so, obtain the model number and manufacturer information. This is located on the unit.
- Depress the locking hooks on the unit and then remove the heat sink. Do not discard the heat sink because it will be needed later.
- Release the lever that holds the CPU in the socket and carefully remove.
- Install the new CPU. Do this by lining up the pins on the socket and slowly dropping into place. Close the locking mechanism that is used to hold the chip in place.
- Apply a small amount of thermal paste on the very top of the chip. Reattach all parts of the CPU.
- Close the case on the computer and reconnect the wires. Turn the computer on.