How to Fix a Sagging Gutter
Should you have a sagging gutter, it is important to get it fixed in a timely manner. Due to the collection of water, a sagging gutter can be a breeding ground for mosquitoes and can cause leaks. Luckily with a bit of know-how a sagging gutter can easily be fixed.
What You Will Need:
- Wood Slivers
- Threaded Gutter Spikes
- Exterior Putty or Caulk
- Hammer
- Ladder
- Pry Bar
- Screwdriver or Drill and Driver Bits
- Replacement Brackets
- Locking Pliers
Bracket Supported Gutters
- Unclip the brackets and remove the gutter.
- Disconnect gutter from downspout.
- Remove the old, damaged bracket.
- Using your caulk or putty, fill the old screw holes.
- Allow caulk to dry.
- Install new bracket where the old one was placed.
- Replace any remaining broken brackets.
- Tighten loose screws.
- Re-install gutter.
Spike Supported Gutters
- Using your pry bar, straighten bent spikes by pushing the gutter up.
- Should the spike need replacing, remove the nails with your locking pliers and hammer.
- Replace damaged spike with a new threaded gutter spike. For extra support and tightness, place epoxy or wood slivers into the nail hole before replacing the spike.
Concealed Bracket Supported Gutters
- Remove mounting screw on damaged bracket.
- Remove damaged bracket.
- Replace with new bracket.
- Replace mounting screw.
Cautions and Tips
- Do not lean your ladder against a gutter, this may ruin it. Try using a freestanding ladder instead.
- Wear non-slip shoes and work gloves for extra security when working with ladders and nails.
- Removing a gutter may be a two person job. Be sure to have a friend or family member help to avoid injury.