Previous Article

How to Erect Panel Fencing

Next Article

How to Fix Farm Gates

How to Fix a Wire Fence

Wire is a great material for fences because it is relatively inexpensive, flexible and easy to work with. Some disadvantages are that it is prone to rust or corrosion and easy to be cut through or inadvertently damaged. The good news is that it is not hard to repair.


  1. Fix your fence with either a pair of needle nose pliers or a soldering iron. How you fix it is up to you and the nature of the required repair.

  2. Have your needle nose pliers, battery-operated soldering iron and new wire. New wire is available by the foot on spools, or you can buy a small spool if that's all you need.

  3. Buy wire that matches the gauge of the wire that your fence currently has. If you are not sure what gauge it is, cut off a piece and take it with you to the hardware store.

  4. Cut away any rusted or corroded ends with tin snips or wire cutters. Get it cut back to solid metal.

  5. Pull the end of the wire that is currently part of the fence out toward you.

  6. Match up an inch of the current wire to an inch of the new wire.

  7. Twist the ends of each together very well to make a smooth twist. If the wire is to heavy of a gauge to bend and twist, just work with what you have by butting and soldering the ends of the new and old wire together. If you do it this way, hold the new piece of wire with pliers. It will get very hot when you solder.

  8. Bend the ends back onto the wire.

  9. Do that for each end so that there is one continuous string of wire where the whole once was with the joints twisted together.

  10. Solder together the twisted joints for extra reinforcement and strength of the joint if you have a soldering iron. If you don't have one, that's OK.