Previous Article

How to Get Military Medals

Next Article

How to Get Mold Off a Screen Porch Ceiling

How to Get Mold Off a Plaster Ceiling

Mold can sometimes form on your ceiling due to a leaky pipe underneath or from improper ventilation in areas of high moisture such as a bathroom. Mold forms when there is excess moisture that is allowed to sit without proper ventilation to dry and evaporate. You can easily remove mold from your plaster ceiling by removing the mold and disinfecting the area so that all mold spores are effectively killed.


  1. Open all windows in the room in which you are working to ensure proper ventilation before working with mold.

  2. Apply a respiratory mask and rubber gloves to protect you from the chemicals and mold spores that are going to be released during the cleanup process. 

  3. Use a shop vac to go over the surface of your ceiling. This will remove any loose pieces of mold and mold spores from your plaster ceiling.

  4. Mix together 2 gallons of water and one cup of bleach in a large bucket. You will need to have a scrub brush and toothbrush on hand to remove any stubborn stuck-on mold that may be trapped in the textured surface of a plaster ceiling.

  5. Clean the affected area with your bleach solution using a large sponge and scrub brush to loosen and remove all of the mold from your ceiling. Rinse your brush frequently to rinse away any mold that may have become trapped inside the bristles. 

  6. Continue with this process until the entire surface of your ceiling is clean and mold-free.

  7. Empty your bucket into a utility sink carefully to rinse out the mold contaminated water.

  8. Fill your bucket with warm water only.

  9. Wipe the surface of the ceiling with a rag and the warm water to remove any remaining mold that you may have missed the first time.

  10. Add one-half cup of bleach to a standard spray bottle, and then fill with water. Secure the lid in place tightly.

  11. Spray down the ceiling with this bleach mixture in the form of a fine mist to disinfect the area where the mold was. Do not spray too close up, as you want the bleach to mist the area, not saturate it. Hold the spray bottle at least eight inches from the surface of the ceiling when misting the surface of the ceiling.