Previous Article

How to Build Tiered Garden Boxes

Next Article

How to Make Wooden Garden Boxes in Your Backyard

How to Hang Garden Boxes

Garden boxes can be used to grow vegetables or flowers, and can be used to expand your growing space. You should hang the garden boxes in areas of your yard that receive at least 6 hours of sun, unless you use plants that love shade in your garden box. You can hang a garden box in a few short steps.

Supplies



  • Measuring tape

  • Pencil

  • Garden box

  • Brackets

  • Drill

  • 3-inchh galvanized decking screws

  • Level

  • 2 ½ inch decking screw

  • Soil

  • Flowers



  1. Use the measuring tape to measure the width of the window where you want to hang the garden box. Make sure the garden box you purchase is at least 8 inches longer than the window.

  2. Measure one inch down below the windowsill and mark the spot using a pencil for double-hung or sliding windows.  This is where the top of the bracket will be.  If you have windows that swing outward, you should measure 6 inches down and mark with a pencil. Repeat for the other side of the window. When you are finished, look at the two marks you made and make sure they are level. Make adjustments, if needed.

  3. Place a bracket on the spot you made so the top of the bracket is on the pencil mark. Use a drill to drill a hole into the bracket for the top screw using a countersink drill bit. Screw a 3 inch galvanized decking screw into the hole so the bracket attaches. Use a level to make sure the bracket is level before you drill the second hole. Drill the second hole above the horizontal leg, so that it is hidden beneath the garden box, and then put in a 3-inch screw. The first bracket is now installed on the garden box.

  4. Repeat this procedure for the other side of the window. Use the level to make sure it is straight before you drill the holes.

  5. Place the garden box over the brackets you just installed. Make sure it is centered and the overhang is equal on both sides.

  6. Use the drill to drill a hole into the back of the garden box, and then insert a 2 ½ inch decking screw into each hole to secure the garden box. Fill the garden box with soil and flowers.