Previous Article

How to Clean Asphalt Roof Shingles

Next Article

How to Paint Asphalt Roof Shingles

How to Install Asphalt Roof Tiles

One of the easiest roofs to install is asphalt roof tiles. They are lightweight and are nailed into the roof with ease. It is best to start your roofing project on a clear day. Always have tarp on hand in case of unexpected weather.


  1. Remove any debris on the roof.

  2. Walk the roof and nail down any loose boards.

  3. Nail the drip edges along the roof.

  4. Staple or nail lightweight sheet metal around the chimney and any protruding vents to create flashing. The sheet metal should be flush on the sides and fan out on the roof to prevent water seeping into the attic. Cover knot holes in the wood with sheet metal, as well.

  5. Apply tar paper, starting at the drip edge and across the entire roof, overlapping the along the drip edge by two to three inches. Peel the adhesive backing from it and secure into place as you move along the roof. Use the leftover scraps of tar paper to cover the edges of the sheet metal flashing around the vents and chimney.

  6. Use the asphalt starter strips along the roof's edge. Nail each one in place, making sure to line them up to the edge above the eaves.

  7. Start at the lowest corner of the roof. Nail the first asphalt shingle in place and work across, overlapping the shingles. Each manufacturer will have their own overlapping instructions; however, it is typical only six-inches are exposed for each shingle.

  8. Work in rows moving up the roof.

  9. Use a tar gun and roofing tar to seal around flashings and any protrusions.

  10. At the peak of the roof, nail roof cap shingles. These are shaped like the letter V.