How to Install Asphalt Roofing

Asphalt roofing is something that homeowner can do on their own. In some cases asphalt roofing can be applied over the existing roof. A few tools are required to install a asphalt roof. A hammer is the most important tool for the job. Just follow some simple instructions to begin roofing.

1. Place the roofing paper on the roof and begin unrolling it. Use a staple gun and insert a staple every six inches.


2. Laying the asphalt shingle at the bottom of the roof. The first layer of shingles is installed backwards.


3. Put three nails in the top edge of the shingle.


4. The next layer of shingles will be placed right up against the first layer of shingles and nailed just as before.


5. Install the second layer but be sure to stagger the shingles.


6. Trim the shingle if the last shingle on the roof hangs over.


7. Cover the ridge of the roof.

Follow this list of instructions to roof a house. Each layer should get easier due to being more comfortable with the process. If the roof is steep, be sure to use tie-ons or some sort of protection in case of a fall, especially if this is a first time being on top of a rooftop. Also, wear boots that have a good grip or tread on the bottom to prevent slipping. Kneepads are also a good accessory to have when roofing a house. Also be sure to stay dehydrated, the heat feels hotter on the roof because of the black roof draws the sun.