Previous Article

How to Cut Glass Mirrors

Next Article

How to Make a Frame for Your Mirrors

How to Install Bar End Mirrors

Bar end mirrors are attached to the ends of the handlebars of a motorcycle. They serve as rearview mirrors, allowing the rider to see behind him without turning his head. The installation of bar end mirrors on a motorcycle is a routine task that the motorcycle owner can perform without special expertise.

Things You'll Need:



  • Bar end mirror

  • Socket wrench set

  • Motorcycle



  1. Pull the rubber caps from the handlebars. They are typically attached to the handlebars only with friction and do not require a tool to remove.

  2. Remove the weights from the handlebars. These weights give the handlebars the proper balance and typically require a socket wrench to remove.

  3. Loosen the mounting screw for the old bar end mirrors by turning the screw counterclockwise with a socket wrench. Slide the mirrors from the handlebars.

  4. Slide the mounting hardware for the new bar end mirrors onto the handlebars so that the holes in the mounting hardware align with the mounting holes on the handlebars. Place the screws through the holes and fasten them with a socket wrench to hold the mounting hardware in place.

  5. Make any adjustments needed to make the mounting hardware fit your motorcycle.

  6. Attach the bar end mirror to its mounting hardware on the handlebars. This generally requires you to fasten the mirror with a hex nut with a socket wrench.

  7. Install the weights onto the handlebars and secure them in place with a socket wrench. Replace the rubber caps onto the handlebars. Adjust the position of the mirrors as needed to obtain an unobstructed view behind you.