How to Install Cultured Marble Countertops
Installing cultured marble countertops is a more budget-friendly option and is typically less labor intensive than other options. In addition to those benefits, cultured marble is usually easier to maintain when it comes to maintenance when compared to tiles.
What You'll Need:
- Cultured marble countertops (pre-fabricated)
- Sledge hammer for demolition of old countertop
- Level
- Silicone caulk adhesive
- First measure the areas of coverage. You can use a carpenter's measuring tape and get the measurement of the length and width. Determine if you will be installing a single piece with the sink pre-fabricated or if you would install the sink separately.
- Visit your local home improvement store and order your cultured marble from the home improvement center or a cultured marble manufacturer. Ensure you have your measurements handy to order the correct size piece.
- Take off the old countertop and sink leaving the cabinet intact if you plan on replacing the base cabinets as well.
- It’s most helpful to begin planning the demolition procedure a couple of days before installing your new cultured marble countertops. Don’t remove the old sink and countertop until you receive your new countertop and sink. This is especially true if you are still using the original one daily.
- Position the new countertop in place without any glue and ensure that it fits snugly. You may have to trim the countertops to fit into the area that is not perfectly square. You can use a belt sander to remove the excess marble and complete this step.
- Install the back splash and make sure that it also fits tightly up against the back wall. Make any adjustment if the area is not perfectly square or if you see any gaps.
- Once you’ve checked that all corners and sides are snug, you can then begin to glue the materials using a 100 percent clear silicone caulk adhesive. Clear silicone adhesives are the better choice because they are sticky and will not discolor on light cultured marble. You should avoid using dark colored adhesives because they may show through the cultured marble once dry. Before applying the adhesives, make sure that you wipe off the dust from the back of the marble using rubbing alcohol. Clean any excess adhesives that may be the marble.
- Allow the area to rest for 8 hours to ensure that the countertop has settled evenly on top of the base cabinet.
- Using a damp cloth and water clean the countertop. Cultured marbles are best cleaned without the use of abrasive materials to prevent scratches.