Previous Article

How to Clean Marble Tile Floors

Next Article

How to Lay Marble Tile on a Floating Floor

How to Install Marble Tile on a Fireplace

A fireplace is usually the focal point of a room. An old, outdated fireplace can ruin the look of an otherwise stylish area. A good solution to this problem is to install marble tile on the fireplace as this will give your fireplace an elegant look.

Things  You Will Need:



  • Marble Tile

  • Chisel

  • Measuring tape

  • Backerboard (optional)

  • Thin-set mortar

  • Tile grout

  • Tile spacers

  • Trowel

  • Grout float applicator



  1. Purchase marble tile. This type of tile is available in a number of different shades, so make sure you consider the color of your furniture, wall paint and room decor. Carefully measure your fireplace to ensure that you buy enough marble to tile the whole area. It is recommended that you buy extra tile in case of breakage during installation.

  2. If there is already tile on the fireplace, carefully remove it using a chisel. Clean the area and make sure that the surface is smooth. If the sheetrock is damaged or lumpy, screw backerboard into the wall to become the surface the marble will adhere to.

  3. Mix together a thin-set mortar according to the package directions. Make sure the mortar is smooth and let it sit for a few minutes.

  4. Use a trowel to apply the mortar to the area you want to tile. Carefully begin to place the marble tiles onto the mortar, twisting each tile slightly and then straightening to ensure that it is firmly placed in the mortar.

  5. Place spacers between each marble tile. Give the mortar 24 hours to fully dry and set before proceeding with installation.

  6. Mix your grout. Remove the spacers from the tile and use a grout float applicator to apply the grout to the area between the tiles. Wipe away any grout that gets on the tiles with a soft cloth.

  7. Let the grout dry for 24 hours.