How to Install PEX Plumbing
PEX plumbing is most often used as a radiant heat component but can also be used for many other hot and cold plumbing systems. PEX is generally more expensive than other options but is worth the money because of its durability and longevity. In addition to its superior reliability, PEX plumbing is resistant to many of the harsh chemicals found in plumbing materials.
What You'll Need:
- Tape measure
- Tubing cutter
- Copper crimp rings
- Ring crimper
- Crimp ring removal tool
- Fittings
- Gauge flow
- Straps
- Hangers
- PEX tubing
Instructions:
- Use a tape measure to measure the exact amount of PEX tubing you need to complete your project. Use your tubing cutter to cut it to your exact specifications.
- Position a cooper crimp ring onto the pipe once you have cut it to your desired length.
- Place the PEX tubing into the pipe fitter.
- Place the copper crimp ring so that it is 1/8 to 1/4 inches away from the tubing.
- Test the crimp ring flow by using a gauge flow. If properly installed, the gauge flow should slide onto the fitting with ease. Initially, the fit may seem tight due to the crimping tool marks made to the surface but it is correct. If you find that the gauge flow is easily sliding over your fitting, begin the installation process all over because it is incorrect.
- Ensure that the crimp tool is not at a perfect 90-degree angle, if so the plastic will dent and not provide adequate rib coverage. Additionally, if the tubing is not cut squarely the tubing will not properly fit or cover the ribs. Over time, all of these mistakes can cause leaking hazards because of a bad connection.
- Begin the next row of tubing by placing the next fitting and repeating the installation process from the beginning. Do this for all the PEX plumbing.
- Create a loop in the PEX tubing no more than 8 times the width of the original tubing to complete the installation.