Previous Article

Homemade Patio Lights

Next Article

How to Install RV Patio Lights

How to Install Patio Lights

Learning how to install patio lights is not difficult, but the job of putting up lights definitely goes better with two people working as a team. String lights on the patio make it easy to create an ambiance, establish a party theme or just add a charming glow to a quiet, romantic dinner outdoors.

Required Items:



  • Ladder

  • Extension cord

  • Tape measure

  • Clips

  • Outdoor string lights




  1. Take measurements of the spaces where you wish to install string lights on the patio. Write down the lengths on a note pad so you have the information handy when you begin shopping. You might want a fancier style with a swag look, which will require longer lengths. Make a rough estimate of the extra length required and add it to you measurements.




  2. Shop for string lights on the Internet or locally. Home Depot or Lowe's should have a fair selection of outdoor patio lights. Pick out the colors, styles or themes that will achieve the look you want. Read each package to see what number of strings can be connected and plugged into an outlet. You certainly do not want to overload your electric circuits. Verify the package says the lights are weather-resistant for outdoor use. Purchase enough strings to cover your measurement lengths and a little longer.




  3. Save time and hassles before hanging the lights by plugging each string into an outlet to make sure there are no bulbs that do not work. Replace dead bulbs with some of the extra strings you just purchased.




  4. Place your ladder at one end of the patio and prepare to install patio lights. If you have a helper you can stand on the ladder and attach the clips to ledges, shingles or gutters. Your helper can feed you the string lights a little at a time while you attach the string to the clips. If you must do this yourself, it is easier to put up all the clips spacing them a foot apart and then make a second pass to attach the string lights.



  5. Plug the string lights into an electrical outlet after you have them all installed. With luck they all should light and you are done. If you have a couple that are not lighting, unplug the string from the outlet and replace the bad bulbs with new ones.