How to Install Picture Windows

If you are replacing an old window, for a picture window you will feel like you are in a totally different place. Picture windows not only give your room a light and pretty view, but they can add value to your home as well.

Things you'll need:

• Picture windows


• Pry bar


• Utility knife


• Flashing tape


• Caulking


• Caulking gun


• Level


• Fiberglass insulation


• Hammer


• Nails


• Screws


• Shims

1. Remove the old window being careful not to damage the opening and surrounding areas of the window. Clear away any loose particles fro the old window to make sure that it is free from left over hardware.


2. Place the new window into the opening to make sure it fits properly without any further cutting or scraping. Remove the picture window and make any adjustments necessary for it to fit securely into the opening.


3. Install flashing tape to cover up the rough edges of the opening. To prevent any possible future leaks add additional tape to the upper corners of the opening. Apply caulking in a couple of rows around the opening edges to make sure the window will seal good.


4. Get the frame completely level. Place the window assembly back into the opening and use your leveling tool in addition to shims.


5. Secure the window assembly light in place temporarily with nails or screws. Again, make sure it is level and do any adjusting needed. Once everything is adjusted perfectly, permanently affix the nails or screws. Cover the entire nail fin using flashing tape.


6. Fill any surrounding gaps using fiberglass insulation. This is to help assure the window is energy efficient.


7. Reattach the interior trim that was removed with the old window. On the outside of the window fix or replace anything that needs to be adjusted, such as the siding. Once everything looks good on the outside, apply caulking compound to make a good solid seal around your new installed picture window.