How to Install a Car Security System
Many people prefer to have a security system of their car in this day and age for peace of mind. Although many newer cars come equipped with car security systems, some do not. You can purchase one from a electronics stores such as Best Buy. Once purchased you can pay to have them install it, or install it yourself and save some money. Installation is quick, easy and economical.
- Decide where you want to place the components of the security system that you are installing. Some models will list a suggested placement for certain components. You will want to make sure when deciding on placement that you keep functionality in mind. Do not place any components where they will be in the way of your dash or any other instruments inside of your car.
- Prepare for installation by disconnecting the battery inside the hood of your car. It is very important for your safety to ensure that this step is done properly. Never install anything on your vehicle while there is power running to it.
- Remove any coverings or outlets that are needed in order to install your device. You will want to follow the manufacturer’s directions for this step. Different security systems will require different things to be removed in preparation for installation.
- Attach your alarm to the underneath of the inside of the trunk. This is the most common placement for an alarm; however, it may suggest another spot in the direction manual for your model.
- Connect the main unit of the security system inside of your vehicle. This step will vary by model of auto alarm. Follow the manufacturer's directions for placement of this device.
- Mount the shock sensor in an area that will be hidden from view. You will want to place it in close proximity to the main sensor since they will be connected together with wires.
- Connect all of the wiring that is provided with your security device. This may include a valet switch, power wire, starter wire, door lock sensors and alarm override switch. Your model may not have all of these, as different models have different features that will need to be supplied power in order to work. It is a good idea to consult the wiring diagram that came included with your auto security device.
- Double check to insure that all wiring is installed correctly and properly insulated as well. You should not be able to see any of the wiring when your job is complete.
- Connect the battery back to your car. You can now test out your new security system to make sure all features are working properly.
- Place all dashboard components that were removed back on your vehicle and tighten accordingly.