Previous Article

How to Install a Decorative Metal Gate

Next Article

How to Install a Garden Trellis

How to Install a Fence Post Without Concrete

Thankfully, we no longer need to set out in the field with our posts on the back of the horse-drawn wagon and our shovel in hand. Putting in fences could not be easier than it is now. The good news is you can still put in a great fence without any concrete whatsoever, but with a technologically advanced twist.


  1. Calculate how many posts you need and have them loaded so you can take them with you. Locust wood posts are recommended due to their longevity.

  2. Pick up some 2B stone/gravel. How much you'll need depends on how many fence posts you are installing. You need about a shovelful for each post.

  3. Rent a posthole digger that is slightly larger than your posts at your local rental equipment place. You'll need a gas-powered one if you will be away from a source of electricity. You can also get a posthole digger attachment for a tractor if you have one or can borrow one. Otherwise, use a posthole digging tool or a shovel.

  4. Dig down 12-18 inches. Don't go much larger than the circumference of your post if you are using a shovel. Disturb as little of the surround soil as possible to make the posts' hold stronger.

  5. Line the bottom of the hole with an inch or so of 2B stones. This helps water drain away to prevent rotting.

  6. Insert the posts all the way down.

  7. Fill in around the bottom of the post with a few inches of 2B stone.

  8. Pack in the remaining void with leftover topsoil. There should not be much to fill in to keep the post tightly in the ground.

  9. Grab each post and try to move it a little to test its strength.

  10. Tamp down the soil around each post.