How to Install a Food Waste Disposal
A food waste disposal or garbage disposal installed in your kitchen is convenient, functional and also useful for eliminating garbage that will end up in a landfill. It also improves the atmosphere in your kitchen by getting rid of potential odors that might occur after food scraps have been sitting in your trash can for a while.
Items Needed:
- Disposal unit
- Adjustable wrench
- Wire cutter
- Screwdriver
- Plumber's putty
- Large heavy book or similarly weighted item
- Small knife
- Turn off the power source to the food waste disposal. This is very important and must be done before proceeding.
- Install under your kitchen sink a ground fault circuit interrupter (GFCI) outlet.
- Run some electrical wire from the ground fault circuit to a switch that has been mounted over the sink. Continue running the wire to the GFCI outlet.
- Disconnect the disposal waste line.
- Remove the disposal mounting assembly away from the sink and place it aside.
- Apply a ring of plumber's putty around the flange of the disposal. Insert it into the drain hole.
- Place a large book or other heavy item on top of the flange so that it does not shift while you work.
- Install the disposal flange's lower mounting rings, upper mounting rings and gasket.
- Secure the retaining ring in place. You should hear and feel a snap when you do this. Tighten all the screws on all the mounting rings, making sure that the flange is secure. When you do this, you will hopefully see a large amount of excess plumber's putty squeeze out from the flange. Trim any extra putty off with a knife.
- Lower the disposal unit carefully to the flange. Secure with the included bolts or mounting ring.