How to Install a Heat Pump
A heat pump is used to help outside heat sources transfer the heat inside your home. It can work in the opposite way to cool your home, as the heat pump can take the inside heat and it outside. Installing a heat pump can save you a good amount of money on your heat bill during those cold winter months.
Things you'll need:
- Heat pump
- Concrete
- Insulation
- Allen wrench
- Choose a location inside your home about 10 inches from the wall, for the outside of the heat pump to be placed. Make sure that the heat pump face and its connections face toward the wall. Keep the unit away from anything that can block the air vents.
- Place your heat pump on a slab of concrete about 4-inches on the outside of your home. Make sure it is not connect to your home. To prevent possible drainage, make the slab level and surround it with gravel. Leave about 3 inches of clearance from the coil at the bottom of the heat pump. This will allow for proper drainage of any type of frost buildup.
- Mount the inside unit for the heat pump inside your home. Ensure that you don’t lift the liquid and suction lines too high if you separate the two parts when you install them by more than 15 feet.
- Use 1/2-inch-thick insulations to insulate the vapor gas line of your heat pump around the tubing. Be sure to insulate the tubing in its entire length. To prevent debris from getting into the tubing, cover the beginning of the tubing.
- Connect the outdoor heat pump unit with the indoor heat pump unit. The copper unit must be round at the end you are connecting. Remove the valve cap off of the outside unit and make sure the cap remains clean. Use an Allen wrench to open the valve body and insert the copper tubing. Put the cap back on the valve. Tighten the valve cap with a wrench and carefully seal it into place.
- Perforate the copper caps with a slow, steady amount of pressure coming from the indoor coil. To keep the coil dry, secure the tubing to the indoor unit. Make sure the coil remains covered to prevent the risk of exposure to moisture.